How to Fix General Printer Error Code 0x10000F6 on HP Printers

Error Code ‘0x610000f6’ Displays for HP Photosmart Plus Printers (B209a, B209b, and B209c)

Caution: This Solution requires making adjustments for your Printer and Computer Settings and so would possibly require the technical experience. It is suggested to name our Printer Support Helpline on +1-877-717-6111 and communicate to our Printer Support Expert who will help you fix the issue.

Issue

The error code ‘0x610000f6 ‘message presentations at the keep watch over panel, and the HP Printer does no longer print when a print command is given.

Solutions

1) Restart the HP Printer.

1. Press the Power button to show off the product. If the printer does no longer flip off, proceed to the following resolution.
2. Wait 60 seconds.
3. Press the Power button to show at the printer.

2) Clear any jammed paper

A Jammed paper may cause the carriage to stall. Follow those steps to transparent a paper jam.

– Remove any free paper

CAUTION: Do no longer take away jammed paper at this level. Trying to transparent jammed paper from the entrance of the product can harm the print mechanism.

– Clear the paper jam

Use the next steps to test for and take away jammed paper from the again of the printer.

1. Press the Power button to show off the product.
2. Unplug the power cable from the again of the product.
3. Push the buttons on all sides of the rear get entry to the panel, after which pull the panel clear of the product.
4. Gently pull the paper out of the printer rollers. CAUTION: If the paper tears whilst doing away with it from the rollers, test the rollers and wheels for torn items of paper that may stay throughout the product. If any torn items of paper stay throughout the product, extra paper jams are more likely to happen.
5. Reattach the rear get entry to the panel. Gently push the door ahead till it snaps into position.
6. Reconnect the power cable to the again of the printer.
7. Press the Power button to show at the printer.

– Open the highest duvet, after which transparent the paper jam

1. Press the Power button to show off the printer.
2. Unplug the power cable from the again of the printer.
3. Open the cartridge get entry to the door.
4. Manually transfer the carriage to at least one facet of the Printer.
5. If there may be paper jammed within the product, gently take away the paper during the most sensible of the printer.
6. Close the cartridge get entry to the door.
7. Press the Power button to show at the HP Printer.
8. Try printing once more and spot if the problem is resolved.

3) Make certain that the carriage strikes freely

1. Unplug the power cable and the USB cable from the again of the printer. 
2. Open the cartridge get entry to the door.
3. Press down firmly at the carriage latch maintain to near it totally. NOTE: If the latch maintains is up, it leads to incorrectly seated cartridges and the printer does no longer serves as accurately.
4. Check whether or not the carriage can transfer freely from one facet of the printer to the opposite. Apply reasonable power to at least one facet of the carriage, after which push it from side to side within the printer.

4) Reinstall the cartridges

The product may point out a carriage jam error if a cartridge isn’t put inaccurately. Follow those steps to be sure that the cartridges are put inaccurately.

– Remove the cartridges

1. Make certain that the printer is growing to become on.
2. Use the get entry to handles at the aspects of the product to open the cartridge get entry to the door. NOTE: Wait till the carriage is idle and silent earlier than continuing.
3. Press the tab on every cartridge, after which take away every cartridge from its slot.

Step two: Reinstall the cartridges

1. Slide every cartridge into its empty slot till it clicks into position and seats firmly within the slot. Make certain that the icon on every cartridge fits the form and colour of the icon at the slot you might be putting the cartridge into.
2. Close the cartridge get entry to door.
3. Try printing once more.

5) Plug the product immediately right into a wall socket

Plug the product immediately right into a wall socket to ensure the ability supply is functioning accurately.

1. Unplug the power cable from the printer.
2. Unplug the power cable from any energy strips or surge suppressors, after which plug it immediately right into a wall socket.
3. Reconnect the power cable to the again of the printer.
4. Try printing once more. NOTE: If the printer prints when plugged immediately right into a wall socket, the ability strip or surge protector will not be permitting sufficient voltage to succeed in the printer.

6) Reset the printer, after which print a standing file

1. Press the Power button () to show off the product.
2. Unplug the USB cable from the product.
3. Unplug the power cable from the product, after which wait 60 seconds.
4. Unplug the power cable from the wall socket.
5. Plug the power cable again into the wall socket.
6. Reconnect the power cable to the again of the product.
7. Press the Power button () to show at the product.
8. Reconnect the USB cable to the again of the product, after which reconnect it securely to the product.

– Print a standing file

1. Load simple white paper within the enter tray.
2. On the keep watch over panel Home Screen, contact the proper arrow to view extra choices.
3. Touch Setup.
4. Touch Tools.
5. Touch Printer Status Report.

If the above pointers don’t lend a hand, name our Printer Support Helpline on +1-877-717-6111 and communicate to our Printer Support Expert who will mean you can to mend the HP Printer Error Code 0x10000F6